Sunday, December 27, 2015

The Best of 2015 and the Anticipation for 2016

When I saw that Cheryl at Meadow Mist Designs is hosting a Best of 2015 Linky Party, I decided to join in even though I don't have many pictures of quilts to show.   I visited a few blogs on the Linky Party and I was filled with admiration at the beautiful quilts that many of you have done in just one year. 

Reflecting Back:
 
The best part of 2015 was that I finished 12 quilts, 4 pillow covers and 2 tote bags for my book with the AQS.  All of which are my original design.  The worst part was that I couldn't show any of them on my blog.  It has been very difficult to not be able to talk about what I have done from the second half of 2014 to the first quarter of 2015.  It will be a big relief when the time comes and I can post an introduction of my book and show some pictures. 

The sad part of this year was that I lost my dear mother in June.  I went back to Thailand in March to be with her and stayed until the end of May.  I came home just in time to celebrate my daughter's graduation from college and then went back to Thailand a week later for my mother's funeral.  Due to the heavy flight schedules during the summer vacation, I couldn't find a flight home until almost the end of July.   I was glad to be back and tried to pick myself up and continue with what I was doing.  

During that time I was part of the 2015 New Bloggers blog hop.  I had been blogging for about a year at the time, and didn't know much about social media.  It was an eye opening journey and I'm glad I took it.  

Then we went on to the 2015 Fabric-Quilt New Block blog hop, which was a lot of fun.   In that blog hop, I got to design a block and it was picked to be part of the 2016 Quilter's Planner by Stephanie Palmer.  That was super-duper fantastic experience for me.  

All these social media activities had forced me to get out of my comfort zone, to interact with others whom I didn't know.  I used to be happy sewing and making crafts in my little sewing room and shared with my own friends.  These activities had helped me to learn new things and to widen my horizon.  One best thing, among other things, is learning to express my feelings in writing, and in English.  Believe me, it's not easy!   I was taught to be humble and not to brag or even talk about myself.  I learned it the hard way when I came to the US and had to go for job interviews.   People perceived me as not having confidence in what I did just because I didn't boast about myself.  But it's all good.  Everything happens for a reason, right?  Now I just have to be careful not to get carried away.....  :)

I must say I have widened my horizon.  I've got to know more bloggers/quilters who are really nice and willing to share their knowledge with a newbie.  Since then, I've joined two quilter's guilds, two mini groups and a few Facebook quilting groups.  The negative of this is that I have less time to sew for myself, but what I gain is joy in being with people with the same interests.  Next year I'll be better at organizing my time with all these new activities.

2015 was also the year of many firsts for me.  I made my first mini quilt with free motion quilting. 


I loved it so much that I made 3 more mini quilts




I posted my first Handbag tutorial and a free pattern giveaway, which was a lot of fun. 



I also made my very first black quilt.  It's for my VMQG challenge and you can read about it here.


In all, 2015 was a great year.   

Looking Forward:

2016 will be very exciting and interesting year.  I'll be promoting my book.   There will be many coveted giveaway prizes when it's time for the book review.  Check back for more information on what to come next year.  I already have one speaking engagement in April at the Valley Modern Quilt Guild.  This will be my first public speaking related to quilt making.  I'm so looking forward to it. 

It will be the year of more designing and making quilts.  Since I joined the modern quilt guild, I want to try my hand at modern quilt designs.  I love what I've seen so far and can't wait to do some experiments with improv piecing and machine quilting.  In so doing, I hope to post more tutorials to share.

It will be a better year of  blogging and contributing.  I hope to be able to contribute more to the quilting community.  I love what I have experienced so far and I feel that it's just the tip of the iceberg.  There is so much more that we can do as a quilter.  Life is a blessing, especially for me, and it's our duty to share.  It will be a better year of reaching out to the quilting universe.

It will be my second blogging anniversary in February which I'm very happy about.  There will be some giveaways for that too so keep your eyes open for that blog as well.

Thanks Cheryl for hosting this Linky Party.  I'm not much of a list maker as far as goals are concerned.  I pretty much plan what I want to do and just do it.  Now that I have things in writing, I'm more motivated to execute them.



Have a great New Year everyone!!
 
Linking up with Cheryl of Meadow Mist Designs for her Linky Party.  Write your own post for your Best of 2015 and come join the party!

Thursday, December 10, 2015

I'm not ready for Christmas

Ready or not, here it comes.  It's almost Christmas and it's time to put up the tree, the lights and bring out the decorations.  I don't know about you, but I never feel that I'm ready for Christmas.  No matter how well I plan.  There are too many things to do, always.

First thing I like to do is placing a few pillows around the room.  But this year I realized I only have one Christmas pillow left and I may not have time to make new ones.  So, for now, one pillow it is.  I designed this pillow for my local quilt shop two years ago.  We had pillow of the month series and this was pillow number 5.



After putting up the tree and more decorations brought in, the room will look better.  This will be the first year that both of our children are out of school, working and on they own.  They will come to help me put up the tree and decorate it while I cook dinner.  I think that's a neat way to get them to come home, don't you think?

What do you do with your family to get ready for Christmas?




 













Handbag tutorial




I made this handbag a few weeks ago and posted it on Sewing tote bags and purses Facebook group.  I was asked by many friends and members for the pattern.  Well, I didn't have one.  I started out with a drawing of a basic tote bag shape, and put the design that I wanted on it.   I knew I wanted to make a big bag.   I like roomy bags so I can haul a lot of things with me, especially water bottles.  I want to feel secure that if I ever get lost, I can survive off my bag.  Well, maybe, but I do have a 72-hour emergency kit in the trunk of my car.

When my sister and friends asked for the pattern, I sent them a copy of my drawings and told them how I did it.  This week, I made another bag so that I can write instructions to share.  You can print out the pdf of the drawings here and here.  These drawings are intended to be used as a guideline only.   I've made some changes in the dimensions for this new bag, after I made the pdf files, because I wanted a little higher but thinner bag.  The point is that you can alter the length, height and width of the bag to your liking.  Here is the new bag.


This is going to be a very lengthy and picture-heavy post.   It's helpful to read the instructions to the end before you start. If you have any questions, please email me to the address below.  I'll be happy to answer any questions.

Materials:

1 yd. bag body cotton ( I used painter drop cloth.  Wash it before cutting )
1 yd. lining cotton
mixed scraps for 1 1/2" x 1 1/4" triangle and 1" square pieces
1 yd. fusible medium weight batting
(2) 19 1/4" heavy weight cotton twill tape for handles
(1) 1/2" decorative button
(1) pair magnetic closures
Chalk marking pencil
Brown thread for top stitching
Matching thread for constructing the bag

Instructions:

1. Cut 3 pieces of bag body and 2 pieces of bag lining.  For this bag, I used the dimensions in the picture below.  Cut 2-inch square notches for bottom.  With 2-inch square notches, you will get a 4-inch wide bag.



2. Use the extra piece of the bag body to cut out (1) outside pocket and (4) handle slot pieces.  The height of the pocket is 12 inches, from the bottom edge, and the handle slot pieces are 7 1/2" x 2 3/8".



3.  Cut 2 fusible batting pieces.  I like to cut them 1/2 inch smaller than the bag body pieces to minimize the bulge.  Fuse them on the wrong side of the bag body pieces.


4. Using chalk pencil, lightly draw a line across the bag body for the flags.  I start and finish the line about 5 inches below the top edge.  Position the flags and pin them in place.




5. Use brown thread to sew the line, catching the top of the flags as you go the first round.  Go back and forth two more times and it doesn't have to be perfect.  Little variant sewing lines make it look more interesting.  On the fourth round, make a detour and sew around each flag.



6.  Now we're going to work on the outside pocket.  Machine baste the top edge 1/4 inch from the edge.  Fold in 3/4 inch from the edge, wrong side together.  Turn in again at the basted line and stitch near the lower folded edge.  Use chalk pencil, lightly draw a line about 2 inches from the top edge.  Position 1 inch square pieces and pin them in place.  Sew them on the same way you sewed the flags.  See picture in step 9.


7. Now we're going to work on the handle slots pieces.  At the short, straight ends, machine baste 1/4 inch from the edge.  Fold in 3/4 inch from the edge, wrong side together.  Turn in again at the basted line and stitch near the lower folded edge. The finished edge is shown using brown thread in the picture below.  Position the handle slot piece on the bag bodies, right side together, two inches from the bag top edge according to the picture below.  Using 1/4 inch seam allowance, sew the handle slot piece onto the bag body.



Flip the handle slot piece over the sewn line and top stitch close to the folded edge.  The raw edges of the handle slot and the top of the bag should match.



Repeat with the other three handle slots.

8. Position the handle between the handle slots and the bag body, match the raw edges at the side of the bag, pin them in place.  The extra 1/4 inch should give a little slack to the handles.  Repeat with the other handle.




9. Position the outside pocket on the other bag body piece with right side facing.  Match all the raw edges and the square notches, pin it in place.  


10. Put two pieces of the bag body, right side together, match all raw edges and the square notches.  Sew both side seams of the bag and the bottom seam with 1/2 inch seam allowance.  Because of the thickness, be careful and go slow when you get to where the handles are, go over them a few times to secure the seams.  Press all the seams open.  It helps to flatten the side seams, with a hammer, where the handles meet.  Keep the seams open while you pound them down and watch out for your fingers.  Match the side seams and the bottom seam, sew the square notch close. 




11. Now we're going to put the bag lining together.  With right side together, sew the side seams and the bottom seam using 1/2 inch seam allowance.  Leave about 4 inches opening at the bottom seam for turning.  Because I have a big outside pocket, I didn't make any inside pocket on the lining.

12. Slip the bag into the lining, right side together, match the side seams and pin them in place.



Sew the top edge together, using 1/2 inch seam allowance.  Keep the handles out of the way while sewing.  Turn the bag inside out through the opening in the lining.  If the side seams still feel thick, pound them down some more with the hammer.  Put some scrap fabric over and under the area to protect the bag before pounding it with a hammer.  Using hot iron, press the bag opening real well, make sure that the lining lays flat behind the bag body.  You can top stitch the whole bag opening if you like.  I didn't because it's too thick for my machine.  I only top stitched on the area between the handle slots where I'm going to put the magnetic closures.

13. Now it's time to put the magnetic closures on.  Find center point of the bag opening, mark it with a pin on the lining.  Cut two 1 1/2 inch pieces of fusible batting remnants.  Through the opening, position one piece of fusible batting to the wrong side of bag lining where marked, fuse it in place.  Repeat with the other piece on the other side.  On the right side of lining, follow the manufacturer instruction and put the magnetic closures on.  


You don't have to do this, but I like to put a little fabric glue on the back of the fusible batting behind the magnetic piece to glue it down to the batting on the bag body.  Put wonder clips on to hold them in place and let dry over night.  It's just a little step to make sure that everything is in its place.  It's a little crampy because you have to do this step through a small lining opening.

14. Hand sew the button on the outside pocket.  You can put it any where you want.  I'm using this to divide the pocket in half so I put it right in the middle.



15. Sew the lining opening close and your bag is done!

I hope the instructions are not too confusing for you.  If you have any questions, please email me at Craftheaven09@gmail.com.  Thanks for visiting my blog.  I hope you'll come back and leave me some comments and share your version of the bag.




Have a fun sewing week!!